Leave a comment

Quick Crafty Tip: Using Pants Hangers

I don’t have a ‘Crafty Compilation’ for either of the last two weeks as I’ve spent them working primarily on some sample knitting that I’m not sure if I can talk about yet.  So, instead, here’s a quick tip for those of you who enjoy coloring: pants hangers are your friend.

tip color with clips 02

Yup.  Actual hangers that you use to hang up your pants.  (Or your kids’ pants, in my case).
tip color with clips 05

I’ve been using binder clips with my Art of Coloring: Disney Villains book ever since I got it.  I’ve been using a lot of water media in it and I’ve taken to clipping the book shut whenever I’m not using it to minimize most of the page warping.  Because this book has thick cardboard covers it stays open pretty flat on its own, though I tend to pop the clip onto my working page mostly so I don’t misplace it until I need it again.  With other books I’ve taken to working on a clipboard for both the hard surface as well as the ability to clip the book open to my current page.  For the most part, that worked perfectly.

tip color with clips 04Then one day I was laying on my belly in bed coloring the page above (the Eagle image in Kerby Rosanes’ imagimorphia).  It was held down by my clipboard on the far right of the right page but I kept getting frustrated at the left-side page flipping shut every time I reached over for my coloring supplies (Stabilo 88 and Staedtler Triplus fineliners, as well as Caran D’Ache Neocolor II watercolor crayons for the purple wisps).  I’d been laying on my belly and constantly raising up onto my elbows to brace the page between color changes was starting to hurt more than the coloring itself soothed.

Henri had had a similar problem holding open his Pokemon books so he could sketch from them, and I’d lent him my cookbook stand.  It was a great solution but now that I needed it I didn’t have the heart to steal it back for myself.  That’s when I remembered the image going around Facebook a while ago in a list of kitchen tips: using a pants hanger to hold your recipe up and out of the way, by hanging it from an upper cabinet doorknob.  I had no need to hang my coloring book, but it would be perfect for what I needed too!

tip color with clips 03

And it was!  The two clips hold the pages down on either side, but the stiff bar that connects them keeps them open flat, where the book could otherwise still slip shut.  (The above wip image is also from imagimorphia, and the background wash was done with the Neocolor IIs).  After you’ve finished coloring the page, the hanger can then be used to clip the book shut as it dries to minimize any warping from the wet pages.

If you wanted you could also store your books from the hangars, sideways along a bar similar to needlepoint sets.  (Ooooh now I’m picturing a dry cleaner-style conveyor holding all my coloring and craft books… that would be awesome!!)

tip color with clips 01

And for an easy reminder to pin:

tip color with clips titled

 

That’s all for now.  Hopefully this tip could be handy for some of you!

—-

If interested in some of the items I mentioned in this post, you can check them out below:
Kerby Rosanes’ imagimorphia coloring book
Art of Coloring: Disney Villains coloring book
AMCO 3 piece cookbook stand
  • these are affiliate links.


3 Comments

Playing with Caran D’Ache Neocolor II watercolor crayons in Kerby Rosanes’ imagimorphia

I’d been researching watercolor pencils a little while ago, and while reading review sites I came across a few mentions of the Caran D’Ache Neocolor II watercolor crayons.  They looked interesting and were lauded for their bright, vibrant colors and creamy texture, so I made a note to look up more reviews.  In the meantime, I remembered that at some point during my creative history I’d owned a set of, what my memory told me, were kid’s-quality twist-up watercolor pencils.  I could picture the set, and knew there was only one place in my home-office they could be, so one morning I went downstairs and took a look.

I found the twist-up colored pencils right away… and was disappointed to see they were just that- colored pencils.  Nothing water-soluble about them.  It was frustrating to have been mistaken but I figured I’d just continue my research… and then I peeked through the rest of the drawer just to see what other drawing supplies I’d collected over the years and had forgotten about.

neocolor 01

What a discovery!  I think I squee’d out loud when I saw the white edge of the tin under an old pencil case of charcoal and blending stumps.  Not only had I forgotten I owned these but clearly I’d barely ever used them when I got them, because they were all still full-sized and touching the sponge strip running the top of the case.

Immediately I brought them upstairs to try out.  I’d been stuck in bed, resting my legs due to a really bad bout of sciatica, so I put together a little portable watercolor kit that I could use in bed without making a huge mess: a tiny tupperware of water, a fine-tipped paintbrush, and a folded handtowel for blotting and cleaning my brush, all contained within another small tupperware that I could close up and store with my craft supplies.neocolor 11

I made pages for them to add to my swatch book.  I didn’t want to use water in that pad itself because the paper is so thin, so I folded a sheet of cardstock in half and tore it into two papers that each fit on my swatch book’s pages.  I scribbled a little bit of each color onto the paper and then activated each with a tiny bit of water.  These colors are so rich and the crayons dissolve so easily that a SUPER tiny amount of water is all that is needed.neocolor 12

After the swatches dried I labeled them with the color names from the Caran D’Ache site and then used a glue stick to affix them into the swatch book.  Now- onto the coloring!

My first test was the inside cover page of Kerby Rosanes’ imagimorphia, which I have been loving lately.  I colored the page pretty quickly, not bothering to fully fill in all areas (like the cut area of the tree, for example) because I knew once wetted, the color would spread.  I did some minimal color mixing and shading on the leaves, deer and dino, all using the crayons as crayons to color.  Sadly they’re old enough that they became fragile, and two colors broke in half as I worked.  They’re still usable, but I was disappointed.  More evidence of their age is the (removable) white bloom on some of the darker colors, as well as how the lightest brown dried out to the point of looking like a Flake chocolate bar inside its wrapper.  😦

neocolor 02

The crayons applied color wonderfully but, as to be expected of crayons, they didn’t have points sharp enough to work into the fine areas of the image.  I was able to use the edges of the points to get into fine spots like the rays’ tails and such, but I didn’t bother trying to color the butterflies, knowing I’d just make a mess.  In some areas, like the pom-pom-looking little dudes, I only colored the center, planning to move the color outwards later, once I activated the paint.neocolor 03

The very first spot I activated were the clouds in this image.  I set a sheet of cardstock behind the page to protect it from any bleed-through or water damage, but it really took such a tiny amount of water that I doubted there would be any actual problems on the reverse-side pages.

neocolor 04

You can see in this enlargement of the lower edge what the clouds looked like before the water was applied, as well as the rough, uneven coloring job I did.  I’d cringe, except it was deliberate.  After seeing how vibrant the colors were and how much they spread, I didn’t want to waste any of the crayon filling in any more densely.

neocolor 05

This is the final result.  I can’t get over the difference, and how smooth and rich the colors turned out!  I did manage to achieve some subtle shading and depth to the colors, and if I’d wanted to color over-top and re-wet I’m sure I could get even more effects.  The largest difference for me is in the tree, the deer and the dino, but I’m charmed by all of it.neocolor 05 back

I was super-pleased (but not surprised) to see that there was NO bleed-through on the other side of the page.  This means I can use these crayons throughout the book without worry, which makes me really happy.neocolor 06

Here’s a side-by-side to really compare the before and after images.  Besides blending out the patchy scribbles, the colors (which were pretty vibrant before) didn’t fade out and some became even brighter.  They blended beautifully and dried really quickly, but not too fast that I couldn’t move around soft watercolor washes.neocolor 07

For the facing page (above) I decided to try using the crayons in a different fashion, as if they were individual little sticks of paint.

neocolor 08

I wetted the brush, blotted most of the water off, and then dabbed it against the tip of the crayon, picking up some color, which I then applied to the image as paint, just as if I’d picked the color up from a palette.  You can see some of the peach on the tip of my brush, as well as on the face and hands of the little girl I’d just painted.

neocolor 10

This is the finished image after painting.  In contrast to the side where I colored first, I think this side has a softer, almost dreamier application.  However it is slower to keep re-dabbing the brush to the crayon, and it makes mixing colors more difficult as the paint dries much faster when using this method.  I greatly recommend it for areas where you need more control or a finer application than you’d get with the stubby crayon.

This method also made me realize that my broken crayons were not a loss, nor was my flakey, dried-out tan.  I can put a small piece of the color in one of my palette wells and activate it to use as paint, meaning that no part of these (expensive!) crayons will ever be wasted.  🙂

neocolor 10 back

Here’s the back, showing again that there was no bleed-through or ghosting.

I’m really glad I found these crayons in my stash, and I can’t wait to play around with them more in this and other books.  The colors are incredible and they activate so easily and beautifully, I really recommend them.  Mine have broken and dried out, but they are also over 15 years old (!!!) and still work as well as if they were brand new.  I would wholeheartedly recommend these.

——–

If interested in either the crayons or book that I’ve talked about in this post, you can check them out here:
Caran d’Ache Neocolor II watersoluble crayons:
Kerby Rosanes’ imagimorphia:
  • these are affiliate links.


Leave a comment

Last-Minute DIY Pikachu Costume

All month Henri has been telling me he planned to wear his Creeper costume for Halloween this year.  He’s brought it up many times and even pulled the head out of the dress-up bin in our den to try it on and be sure it still fit.  And then this past Friday his class went to circus school for the day and he came home like this:

photo-2016-10-28-2-50-04-pm

and then told me he wanted to be Pikachu for Halloween.

This guy:

pikachu

Um.  Okay.  We had nothing at home I could use to make a physical costume, but I knew we’d be going to Walmart the next day so I told him if we found a set of face paint, I’d buy it and would paint his face like Pikachu.

Saturday we were at Walmart and found some inexpensive face paint, but then he started complaining that he didn’t have Pikachu’s ears.  I thought about it a little and told him we’d be going to the dollar store next; if he found a headband that fit him I’d buy some yellow felt and make him some ears.  He found a girl’s one with a plastic bow attached, but it was yellow and fit him, and they had a pack of felt with yellow in it so we brought it home and I set it aside.

Yesterday I was at my parents’ house for dinner and Henri made a comment about being excited to wear his Pikachu costume to school the next day and I realized – oh crap, Halloween is tomorrow!

Ahem.  Forgive me, my brain has been a little foggy lately.

We got the kids home and to bed and then I sat down and made Henri’s costume.  It was quick, and it was easy, and it used either dollar store supplies or things you may already have on hand, so if you’re stuck for a last-minute costume, here’s how you can whip  this up in plenty of time to go trick or treating tonight.  Grab a friend who’s dressed like a Pokemon Trainer and you can be your very own live Pokemon Go team.  🙂

post-pikachu-diy-costume-title

The first thing I did was carefully cut off the plastic flower on the head band, then I put it on Henri’s head and marked off where the ears should sit.  As it happens we have a large Pikachu doll that was the right size to trace for the ear shape, but you can just freehand it.

post-pikachu-diy-costume-01

After the ear shape was drawn, I drew a second line about a quarter inch outside it, for a seam allowance.  Then I cut out the shape through all 4 layers of yellow felt.

post-pikachu-diy-costume-02

The next step is to sew the ears together.  I used yellow thread and a simple running stitch since the ears wouldn’t really be under any tension.  I left the open end edges unsewn for about a quarter inch so I had enough fabric open to gather over the heandband.  If you don’t want to sew, you could also glue the sides shut, but if you do make sure to put the ear side that you drew on on the inside to hide the pen markings.

Next I colored the ear tips with a black sharpie.  The mess you see on the right is the transfer of ink from one side when I flipped it over to color the other side.  I’m showing you this so you can be prepared and cover your work surface.

post-pikachu-diy-costume-03

Once the tips were colored I stuffed each ear with some loose batting then sewed them over the sides of the headband where I’d previously marked.  I used a blanket stitch to close the open edge but you can use any stitch you like, or glue them shut as well.

post-pikachu-diy-costume-04

Here are the finished ears.  They look silly off but are kind of cute on.

photo-2016-10-30-9-59-10-pm

(Yes I had to try them).

While I was working on the ears I kept glancing over at the tail on our stuffed Pikachu and realized it wouldn’t take that much more effort to make one too, and surprise Henri.

To start I took some cardboard from our recycling bin and sandwiched it between two sheets of white cardstock with a regular glue stick.  To make sure it dried well I placed it flat on the table and set some heavy books on it.  Once the ears were done the cardboard had fully dried and I was able to trace Pikachu’s tail onto it.

post-pikachu-diy-costume-05

Then I cut out the tail.  I brainstormed a few different ways to attach it to Henri.  I don’t like the idea of sending a 7yo to school with a safety pin on his butt, so I came up with a belt method.  To make it work I carefully pried back about an inch of the tail section and folded the cardstock on each side outwards.

I used my Spectrum Noir markers to color the yellow of the tail and then colored the lower edge with a black Sharpie, completely overlooking the fact that it’s supposed to be brown, because I was working in dim lighting.  D’oh.

post-pikachu-diy-costume-06

To make the belt section, I first cut two holes into each side flap.  I then threaded three strands of yellow yarn through each side, made a knot to secure them near the top, and then braided them into belts which I could then slide through the belt loops on his jeans and tie at the front.  I made them longer than needed because I didn’t have his waist with me to try them on, and had planned to cut the excess this morning but we ended up just tucking the ends into his jeans.

post-pikachu-diy-costume-07

And there you have it!  Add in some yellow face paint, bright red cheek circles and a black triangular nose and poof-

post-pikachu-diy-costume-08

You’ve got one happy Pikachu.

Have a happy and safe Halloween!

henri-pikachu-collage-site

—-

Looking for more Halloween costume ideas?  Check out this post.


1 Comment

How to make a Minecraft Enderman head (with bonus diamond block trick-or-treat basket)

Some of you may, like me, be suddenly realizing there are only ten days left until Halloween.  No stress – there’s still plenty of time to make a Minecraft Enderman costume, complete with a matching diamond block trick-or-treat basket!

enderman-costume

For Halloween last year Jakob wanted to be a Minecraft Enderman.  For reference, these are the tall, spindly black figures who appear out of nowhere to steal your blocks.  They’re neutral mobs who can teleport and will only attack when provoked by looking them in the eyes (which, to be honest, is kind of hard to avoid, seeing as how they’re the most vivid part of the things!).

minecraft-enderman

In the game Enderman can’t actually pick up diamond blocks, but that’s what Jakob wanted anyways.  To be an Enderman carrying a diamond block.minecraft-diamond-block

I was fresh off my “Skylanders Sprocket wrench pulling double-duty as secret purse” achievement so I thought if he’s gonna be schlepping a box around anyways… why not make it useful and turn it into his trick-or-treat basket?  So that’s what I did.  🙂photo-2015-10-25-8-10-14-pm

The first thing to do was assemble all materials.  In total the two parts of the costume required the following: a box large enough to fit over the wearer’s head, a second box to be the treat basket, paint in the appropriate colors, masking tape, ribbon, double-sided tape, scissors, a paint brush, and something (I used a styrofoam plate) to use as a palette.  Not shown is a gauzy black scarf from which I cut fabric to cover the eye-holes, but that step is optional.  Everything but the boxes and scissors came from my local dollar store, making this not only an easy costume to make, but a really inexpensive one too.enderman-head

ENDERMAN HEAD

Top row:

  1. Assemble all materials
  2. Cut off the flaps on the side of the box you want for the opening.  Tape down all other flaps securely, using double-sided tape on the inside and then masking tape to cover all seams on the outside.  Also use tape to cover the cut edges at the bottom.
  3. Measure out your grid on all 5 remaining sides of the box.  I used a simplified 8×8 grid for mine.

Middle row:

  1. Cut out the eye holes.
  2. Cover the cut edges of the eye holes with masking tape, then paint the Enderman’s eyes with two different shades of purple.
  3. Paint the rest of the Enderman’s head.  I followed a chart pattern using shades of charcoal and black but you can just as easily paint the whole rest of the head solid black.

Bottom row:

  1. Optional: tape a piece of sheer black fabric over the eye holes so they don’t show from the outside but can still be seen through on the inside
  2. Enjoy your new Enderman head!
  3. Wear with black sweatpants, a black sweatshirt, and black stretchy gloves.  Add a diamond block trick-or-treat basket for a complete Halloween costume!

enderman-facets

diamond-block

DIAMOND BLOCK TRICK-OR-TREAT BASKET

Top row:

  1. Assemble all materials
  2. Cut off the flaps on the side of the box you want for the opening.  Tape down all other flaps securely, using double-sided tape on the inside and then masking tape to cover all seams on the outside.  Also use tape to cover the cut edges at the bottom.
  3. Mix aqua and white together to get a few different light aqua shades.

Middle row:

  1. Following an in-game image of a diamond block, paint one side in shades of aqua, making one lower corner darker for shading.  Repeat on the other 4 sides.
  2. Add a border to all 5 sides using the aqua paint at its full strength.
  3. Paint the inside of the box black.

Bottom row:

  1. Make 2 holes in 2 opposing sides.  Knot ribbon through the holes to act as handles.
  2. Enjoy your diamond block trick-or-treat basket!
  3. Add to the Enderman head for a complete Halloween costume.

photo-2015-10-31-2-00-41-pm

One optional step that I did but is not obligatory at all is to spray the painted sides with a sealant.  I didn’t know what the weather would be like on Halloween and didn’t want to worry about rain causing the paint to run.

photo-2015-10-31-2-06-17-pm

And that’s it!  The longest part in making these costume pieces is waiting for the paint to dry.  🙂

(PS: Looking for the big guy’s little buddies?  Check out my tutorial for Minecraft Steve and Creeper heads here!)

minecraft heads wip 12


1 Comment

Halloween help

My phone has been pinging quite a bit lately, notifying me that people have been saving my pins.  While I think that’s awesome, and am flattered, I was also confused because I couldn’t think of what I’d posted that would be so popular at the moment.  And then I remembered – it’s almost Halloween!  Sure enough, it was my Minecraft-related pins getting all the love, the Creeper/Steve head tutorial especially.

So for anyone who found my blog via those pins, or anyone else who’s interested, here are some quick links to my (few) Halloween/costume-related tutorials.  I do have more coming up this month, so be sure to come back and see.*

For those with some boxes and paint lying around: here’s how to make Minecraft Steve & Creeper heads.

For those who need an easy addition to their Gryffindor robes, here’s a quick free scarf pattern.

For those with a young’un eager to train a dragon, here’s how to make a viking vest.

And finally, for those with a lot of knitting time on their hands, here’s how to make a child’s first superhero costume, as well as a look at how I used that same pattern to turn Jakob into Superman for his first Halloween.

I hope you enjoy the links!  For my fellow Minecraft-loving folks, I’ve got a matching Enderman tutorial coming up, complete with his very own diamond block.  Stay tuned!

 

*I know I’ve said that often, but I’m currently off work awaiting surgery so I have the time to actually DO the posts!


Leave a comment

Making a Pitfall: The Lost Expedition cake, day 03 part 3- finishing

It’s been brought to my attention (*cough*Michelle*cough*) that I never finished posting Henri’s Pitfall cake.  That is correct… February sort of got away from me, so I’ll take care of that right now.  This post will cover the final details of finishing the cake the night before the party, and my next post will show the final cake at the party, complete, and enjoyed.  🙂

In my last Pitfall cake post I left off with the cakes assembled and dirty-iced.  I set them aside for a little bit so the icing could crust and mixed up some green for the grass.  I deliberately gave it a bit of an aged, almost faded color so it would match the tones of the fondant leaves and the brick wall.  The wall was so dirty and stained/old-looking that a bright, primary-colored grass base would have looked really, really out of place. pitfallcakeday03part03-04

I covered the top cake with the same cake-filled chocolate icing as I used on the lower base, blocking out an area for the small pool at the top of the waterfall.  Then I used green icing to block out the larger pool at the bottom.  Once the brown and green were done I used more white icing to thicken the base coat on the various water areas.pitfallcakeday03part03-05

Then I realized that the pool I’d created wasn’t wide enough to fit the crocodile I’d already made.  Oops!  So I used more white icing to widen the water.

My cakes are often like this.  Very rarely is something sprung to life, fully formed, exactly as it was in my head.  It might be close, in the way this cake very closely resembles my initial sketch, but the actual details in the getting there are always very fluid, and often borne of the desperation and delirium that comes from cake decorating in the wee hours of the night when stores are closed and coffee is cooling.pitfallcakeday03part03-06

Next I mixed up some blue for the water and layered it on over the white.  I didn’t worry so much about the edges where the water and grass meet as I knew I’d be placing leaves there, and I deliberately left it choppy on the waterfall where I wanted it to look like there was some motion and churning.  I also played with swirling my knife around to make the water look a bit rough because the waterfall would prevent it from being a clear, calm pool.  Above you can see the cake as I worked on it (with the parchment protection) and then how it looks once I removed the parchment.  I always keep the parchment in place until I’m ready for the finishing details as it’s much easier to remove dirty parchment from around a cake than icing from the cake board.

One of the things I’d been thinking about in the days leading up to D-day (decorating day) was how to make vines.  I figured I’d just roll out some fondant pretty thin and hope it wouldn’t crack once it dried.  But when at the dollar store that afternoon during my unexpected child-free time I hit on the idea to try using caramels.  pitfallcakeday03part03-01

I figured they were already pliable, and edible, just like fondant… but had a better stretch.  Hmmm…could this work?

pitfallcakeday03part03-02

I’d decided to do a quick test before going to pick up the kids from the party.  I softened 2 caramels in the microwave and then when they’d cooled enough to touch, added a touch of green food gels.  I kneaded it together just like dough/fondant and was thrilled that the caramel took the color evenly, with no streaking or dissolving from the added moisture.  I quickly rolled out a quick, curly vine and set it aside to dry while I was out.pitfallcakeday03part03-03

This is what I came home to (above).  A perfect, jungly-green colored, held-its-shape vine that was smooth, crack-free and best of all, delicious.  (Okay, there had been 2.  Yum.)

Sweet!

(Pun intended).vinepintereststrip

For my Pinterest friends, here’s a graphic for you!

Now that I knew I had the solution for the perfect vines, I got to work.  I wanted to set the vines in place before finishing the grass because I knew working on one could destroy the other.pitfallcakeday03part03-07

I rolled and rolled and rolled and rolled and rolled, placing each vine in place before rolling out the next one.  The vines that draped around the wall stuck pretty well with a tiny touch of water, only on places where I wanted a curl or end to stay up.  For the most part, though, I left them unstuck so gravity would work on the caramel and make it look more natural.*

I had an image in my head of vines hanging down like curtains, helping to hide the secret healing spring.  So for those vines, as I made each one I used the tip of a knife to lift the cake board that the top cake was sitting on, just enough to wriggle the end of the caramel underneath, and poking it in with a needle tool if I had to.

After the vines were done I tackled the grass.  My first thought was to use my grass tip and pipe out the grass like I’d done around the Betty Boop cake.  Only problem was I knew I was going to use my remaining green icing to do grass around the edges of the cake where it met the board and I didn’t think I had enough icing left.  I was tapping some piping tips against my palm, trying to figure out if I had enough icing mixed up for all the grassy areas, when I looked at the marks I’d left on my skin and got another bout of inspiration.  (My pain = cake gain).pitfallcakeday03part03-08

I used an open star tip and basically poked the hell out of the grass areas.  My icing had crusted enough to be an ideal surface, but if your icing is still soft I’d stop every now and then to clean your tip, as the grass effect works better with smaller pokes vs larger flat areas.  It was remarkably convincing for grass, and I’m really, really happy with how it came out.

Plus it left me with enough green icing left to pipe long, marshy grass/weeds around the base of the cake.  I did that, then stuck down the leaves I’d darkened, then decided to call it a night.

pitfallcakeday03part03-09

In the back you can see the remaining leaves I didn’t end up using.  Don’t worry, they didn’t go to waste.  The kids ate them all over the next few days.  🙂

pitfallcakeday03part03-10

I tried to vary the lengths of the grasses to make it look more natural than an even, trimmed border.  pitfallcakeday03part03-11

In these final two pics you can see the two sides of the cake, and the finished vines and grasses.  I’d added some long grass to overhang the vines as well.pitfallcakeday03part03-12

Next time – the cake in situ!

*remember this for my next post :/


1 Comment

Making a Pitfall: The Lost Expedition cake, day 03 part 2- assembly

For those following along, at this point in the Pitfall: The Lost Expedition cake process, I had fondant pieces, I had rectangular baked cakes, and I had some cardboard and a brick-wall-looking stand.  Now, on the night before the party, was the time to start putting it all together.pitfall the lost expedition cake day 03 part 02 assembly 01

Step 1 – cover the cardboard cutouts with tinfoil to use as makeshift cake boards.

pitfall the lost expedition cake day 03 part 02 assembly 06

Step 2 – Confirm plan.  At this point I got a piece of paper and made a note of the order in which I had to do each step, because if I’d gone out of order (like sticking the waterfall down on the top tier before icing the bottom, for example) I’d make things harder on myself than they’d need to be.pitfall the lost expedition cake day 03 part 02 assembly 02

Step 3 – carve the cakes.  I always use my largest unserrated knife for this, and have a large tupperware or two nearby for collecting the leftover cake (after being leveled or sculpted).

pitfall the lost expedition cake day 03 part 02 assembly 03

For the top cake, which would become the top of the waterfall, I didn’t level it.  My cake had baked up much thicker in the center, but in a large enough area that I could cut a thicker cake in the shape I needed.  If I’d leveled it first to the height of the outer edges I’d have had a much shorter cake for no reason.  If the cake had been wide enough to cut my oval twice and stack them, I’d have done it, but it wasn’t big enough.  I cut the cake from the thickest part and used some icing to ‘glue’ it down to the cake board, then set it aside.

For the lower cake I used the cardboard to carve out the right shape so I could butt the cake right up against the stand.  After making sure it fit, I set that one aside as well.

pitfall the lost expedition cake day 03 part 02 assembly 04

Step 4 – Solidify base.  I had my cake boards, 2 of them ‘glued’ together with icing.  I needed to attach my base somehow because otherwise the moment I’d try to transport the thing it would tip backwards, being so heavy, and separate from the cake which would be stuck to the board.  I stared at it a little while, wishing I had thought to Dremel 2 holes in the base BEFORE decorating, so I could quickly zip-tie it together, when I got an idea.  The base sat a few mm above my cake boards (less than 1/4″).  I couldn’t use glue or tape because I didn’t have any thick enough, but I did have fondant, and I knew that could dry pretty hard.  First I traced the shape of the stand onto the silvered board.  I took a few gobs (technical term) of white fondant and moistened them slightly so they’d be sticky all around, and pressed them down around inside the base’s outline.  I quickly put the base in position and pressed down on the lowest tier, using a knife handle to get into the back, and really squish the fondant and board and base together.  I waited a minute or two then tried to lift the base by the top tier… and the entire board lifted.  Success!

(Around this time I’d also cut open and re-taped a cardboard box, as seen above, for transport.  It was open at the front but had a closed back so I could carry the cake by supporting the back of the box instead of touching the stand itself when I moved it.pitfall the lost expedition cake day 03 part 02 assembly 05

Step 5 – After making sure the base was well-stuck to the cake boards I cut a strip of plastic from my baggie the width of the waterfall I wanted, and used packing tape to tape it down to the bottom of the lower tier.  I used a few smears of vanilla icing to glue my cake board down over it, sticking it well to the stand.  I didn’t want it able to move at all.pitfall the lost expedition cake day 03 part 02 assembly 07

Step 6 – I crumbled some of the leftover cake and mixed it into store-bought chocolate icing to make a rough, earthy-texture, and used that to coat the cake board for the cave floor.pitfall the lost expedition cake day 03 part 02 assembly 08

Then I set the healing spring into place.  I didn’t bother using anything to stick it down, the icing floor was still wet and the spring was heavy enough that I knew it wasn’t going to move.

pitfall the lost expedition cake day 03 part 02 assembly 09

Step 7 – Then I taped the waterfall up and into place with more packing tape, making sure it was secure.  I knew there’d be a cake sitting on top of it, but still…pitfall the lost expedition cake day 03 part 02 assembly 10

Step 8 – At this point I set the cakes into place.  I put the lower cake down first, using icing to glue it in place.  I protected the cake board with strips of parchment paper, then set the top cake down with some icing too.  Putting the parchment around the back and under the front (on either side of the waterfall) was a bit trickier, but I used the tip of a knife to ease the cake forward or up and wiggled the parchment strips into place.  Then I gave everything a dirty ice (crumb coat) with vanilla storebought icing.

pitfall the lost expedition cake day 03 part 02 assembly 11

I just realized the pics are out of order, and that I’d crumb coated the base before adding the top.  Ah well.

Oh- I included the waterfall in the crumb coat on purpose.  I knew it would later be mostly covered with blue icing, but I wanted there to be some depth to the water so it would look like it was moving.  I also gave it a deliberate thick, choppy layer at the base where it reached the cake (as seen in the last pic).  Waterfalls often have a churning, frothy spray at the base and this would help imply that.

Up next – the fun/scary part… decorating!